Acryl Putty Super Fine is a fast drying formula with a working time of 1.5 minutes and 15 minutes of drying.
15g packaging for model designers only, not for sale to children under 16 years.
Shake well before use.
- Dough fills small surface imperfections
- Easy working properties include good spreadability
- Leaves smooth, quality edges
- Low shrinkage offers best end results
This fast-drying Acryl Putty Super Fine formula restores smooth surfaces by filling small holes, scratches, splinters and other minor defects in materials such as plastic, wood, resin and iron.
Our acrylic putty offers easy sanding, smooth spreading and low shrinkage. When the dough is completely dry, you will notice its low shrinkage rate and excellent surface adhesion. The repaired object will resist peeling and chipping. With the best results and the least work, our dough offers light, high quality properties, which means it is easy to soften the edges to blend in with the surrounding surface. Good lightness will produce more satisfactory results and reduce sanding.
Instructions for use:
Do not apply when the ambient temperature is below 13ºC or above 43ºC.
Use in a well-ventilated area away from sparks or flames. (Do not apply material below the waterline unless the coating is above.)
For best results, apply only to clean surfaces. (Use compressed air to remove any dust contamination.)
Apply using a plastic or metal spreader by pressing grease firmly into imperfections; keep application thickness to 1/16 "or less.
Apply in thin layers instead of a thick application. Let dry before sanding.
Clean the surface again before primer or coating. (Follow primer and coating paint manufacturer's recommendations.)
- Keep out of the reach of children.
- Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
- Do not breathe vapor or dust.
- Wear protective gloves.
- IF IN EYES: Rinse cautiously with water for several hours. minutes If you wear contact lenses, remove them if you can. Continue rinsing
Description of first aid measures Inhalation:
Take the person to get some fresh air.
If you feel unwell, seek medical advice.
Skin contact: Wash off immediately with soap and water. Remove contaminated clothing and wash before reuse. If signs / symptoms persist, seek medical attention.
Eye Contact: Immediately flush with large amounts of water. Remove contact lenses if it is easy to do. Continue rinsing. Get medical help.
IF SWALLOWED: Rinse mouth. If you feel unwell, seek medical advice.