Military reference: FS37038
Military colors are developed through a study based on military documentation.
High quality acrylic paint, designed to have an extra-fine pigment from a formula developed for smooth spraying through an airbrush with perfect surface adhesion and drying, matt finish, which guarantees a perfect painting even for the less experienced.
Note: Colors may change depending on your monitor calibration.
For use and exclusive sale to model-makers over 18 years of age
Fire Scale Colors inks are pre-diluted for direct airbrush use.
Shake the bottle until the paint is well mixed.
USE ONLY WITH AEROGRAPHER Apply over white or gray primer.
It is recommended to paint at 1 bar at 1.5 bar and 3 to 4 thin layers crossed and an environment between 20 ° C and 22 ° C, the drying time is 5 to 10 min minimum, 20 to 30 min being recommended.
It is not recommended to use these paints in cold or damp environments, always check the conditions of the space where you will paint.
To dilute if necessary, use the Fire Scale Modeler thinners.
DO NOT use White Spirt, Thinners acrylic or cellulose thinner, they are not suitable for this paint.
Tools can be cleaned with acetone, never use cellulose thinner or alcohol.
Work in a well-ventilated area and always with a mask and keep away from children.
Tighten the cover for safety after each use.
DO NOT USE NEXT HEAT, SPARKS OR FLAMES DURING THE PAINTING PROCESS
Health and Safety Notes: Harmful by inhalation, irritating to eyes.
Keep away from sources of ignition. NO SMOKING.
Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor.
Wear suitable gloves.
Use in a well-ventilated area.
Keep out of the reach of children.
In case of intoxication contact 112