1K Airbrush Varnish Instructions
firescalemodeler@gmail.com | Call us: +351914442894

1K Airbrush Varnish Instructions

Instructions for use:
Leave the color of the base coat for 15/30 minutes before applying the clear coat and apply a layer of mist (adhesion). After 5/10 minutes, you can apply more coats (we recommend a minimum of 2 single coats for 5 to 10 minutes) between each)

  • Air drying times at 20ºC,
  • Pre-drying: 30-40 minutes
  • Touch drying: 1 hour
  • Total hardness : 24 hours,
  • Completely dry: 48 hours. Can be polished after 48 hours at 20ºC
  • Air pressure: 1.5 bar
  • Low protection varnish and recommended to be applied before decals, for total protection we recommend our 2K varnish.

Shelf life: at least 1 years if stored in tightly closed original containers at low temperatures.

Decals: Whenever you apply layers of light mist over the decals , NEVER go ahead with wet layers, as this can melt the decal

This varnish may react with certain decals, we recommend testing it on a separate piece.

Polishing: This varnish

It is not recommended to use these paints in cold or damp environments, always check the conditions of the space where you will paint.

To thin if necessary use the Thinners Fire Scale Modeler. DO NOT use White Spirit, Thinners acrylic or cellulose thinner, they are not suitable for this paint.

Cleaning tools can be done with acetone, never use cellulose thinner or alcohol.

Work in a well-ventilated area and always with a mask and keep away from children. Tighten the cover for safety after each use.


Health and Safety Notes:

Harmful by inhalation, irritating to eyes. Keep away from sources of ignition. NO SMOKING .

Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor. Wear suitable gloves. Use in a well-ventilated area. Keep out of the reach of children.

In case of intoxication contact 112

For use and exclusive sale to model-makers over 18 years of age