Red Leather Design
Fire Scale Modeler

Red Leather Design

4,50€ EUR
Fire Scale Modeler

Red Leather Design

4,50€ EUR
FSC131

The Fire Scale Color ink was designed to have an extra-fine pigment, with a matt finish and quick drying, which guarantees a perfect painting even for the less experienced.

Instructions :

Fire Scale Colors inks are prediluted for direct use in airbrush.

Shake the bottle until the paint is well mixed. USE ONLY WITH AEROGRAPHER Apply over white or gray primer.

It is recommended to paint at 1 bar to 1.5 bar and 3 to 4 thin layers crossed and an environment between 20 ° C and 22 ° C, the drying time is 5 to 10 min minimum, with 20 to 30 min

It is not recommended to use these paints in cold or damp environments, always check the conditions of the space where you will paint.

To dilute if necessary, use the Fire Scale Modeler thinners. DO NOT use White Spirt, Thinners acrylic or cellulose thinner, they are not suitable for this paint.

Cleaning of tools can be done with acetone, never use cellulose thinner or alcohol.

Work in a well-ventilated area and always with a mask and keep away from children. Tighten the cover for safety after each use.

DO NOT USE NEXT HEAT, SPARKS OR FLAMES DURING THE PAINTING PROCESS

Health and Safety Notes:

Harmful by inhalation, irritating to eyes. Keep away from sources of ignition. NO SMOKING .

Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor. Wear suitable gloves. Use in a well-ventilated area. Keep out of the reach of children.

In case of intoxication contact 112

For use and exclusive sale to model-makers over 18 years of age

Only 1 units of this product remain

You might also be interested in: