Airbrush Set ST3

Perfect airbrush set for novice modelers.
Double-acting airbrush (regulation of air flow and paint when the trigger is pressed).
Airbrush with a 0.3mm nozzle pre-installed.
The amount of ink and the air flow are regulated with a single finger
Adapter and hose covered with fabric of approx. 2 m, with internal thread approx. 8 mm (1/8 ")
Additional nozzles and needles: 0.2 / 0.3 / 0.5 mm
Ink reservoir with 7 ml capacity
Air connection on the gun: 8 mm (1/8 ”)
3 x needle: 0.2 / 0.3 / 0.5 mm
3 x nozzle: 0.2 / 0.3 / 0.5 mm
Includes a small wrench to change the nozzles
Includes 4 pipettes
Plastic box with foam rubber mold

TECHNICAL INFORMATION:
Gun length of set A: approx. 150 mm
Length of the set B gun: approx. 142 mm
Pressure: 1.0 - 3.5 bar
6 x needle: 0.2 / 0.3 / 0.5 mm
6 x nozzle: 0 , 2 / 0,3 / 0,5 mm
Connection thread: 1 /
8 ”adapter: 1/4” - 1/8 ”
Set A ink container: 7 ml of < br> capacity Set B ink containers: 7 and 22 ml capacity

DELIVERY CONTENT
1 x ABPST03 spray gun set including:
2 x plastic box
2 x spray gun (with 0.3 mm nozzle pre-installed with 2 x hose lined with fabric
2 x adapter with 6 x needle and 6 xb ico
2 x small wrench with 8 x pipette and 2 x ink container
1 x instruction manual (DE / EN / FR)